Alumina Ceramic Fasteners/Industrial Fasteners
Properties of Alumina Ceramic Fasteners
1. Alumina Ceramics Fasteners are the most highly regarded and widely used of the ceramic products.
2. It is non-conductive, resistant to corrosion, and are perfect for electrical insulation. Alumina Ceramic Fasteners has proven to be the best ceramic for protection of vital electrical components.
3. It can be processed as tubing, sheets, bars, rods, discs, and many other forms depending on the requirements of the project.
Applications of Alumina Ceramic Fasteners
1. Electronic industry: Alumina ceramic fasteners used are insulating screws and electronic equipment, etc.
2. Medical device industry: Alumina ceramic fasteners used to manufacture insulating, non-magnetic, environmentally friendly and anti-interference medical equipment.
3. Shipping industry: Alumina ceramic fasteners used to manufacture acid-, alkali-, and corrosion-resistant ship equipment.
4. Aerospace industry: Alumina ceramic fasteners used to manufacture aerospace equipment with insulation, heat insulation and strong anti-interference.
5. Communication industry: Alumina ceramic fasteners used to manufacture insulating, non-magnetic and safe communication equipment.
6. New energy industry: Alumina ceramic fasteners used to manufacture new energy equipment that is resistant to high temperatures, chemical corrosion and can extend the service life of the equipment.
7. Other industries: such as machinery manufacturing and chemical equipment, etc., any fasteners that require wear resistance, corrosion resistance, and high temperature stability can be made of alumina ceramics.
Alumina ceramic performance index (Notice of Correct in Leakeage Rate)
NO. | Property | Unit | Alumina |
1 | Al2O3 | % | >99.3 |
2 | SiO2 | % | — |
3 | Density | g/cm3 | 3.88 |
4 | Water absorption | % | 0.01 |
5 | Compressive strength | MPa | 2300 |
6 | 20℃ leakage rates | Torr・L/sec | >10-11=1.33322×10-12Pa・m3/sec |
7 | Twisting in high temperature | mm | 0.2 allowed in 1600℃ |
8 | Bonding in high temperature | not bonded in 1600℃ | |
9 | 20—1000℃ coefficient of thermal expansion | mm.10-6/℃.m | 8.2 |
10 | Thermal conductivity | W/m.k | 25 |
11 | Electric insulation strength | KV/mm | 20 |
12 | 20℃direct current insulation resistance | Ohm/cm | 1014 |
13 | High-temperature insulation resistance | 1000℃ MΩ | ≥0.08 |
1300℃ MΩ | ≥0.02 | ||
14 | Thermal shock resistance | 4 times not cracked in 1550℃ | |
15 | Maximum working temperature | ℃ | 1800 |
16 | Hardness | Mohs | 9 |
17 | Flexural strength | Mpa | 350 |
Our factory
Jinzhou Yunxing Industrial Ceramics Co., Ltd. was established in 2000, mainly producing various types of tubular ceramic products and various industrial parts with alumina content above 99.3%. The factory covers an area of 4000 square meters.
The company's main products are: alumina ceramic tubes, alumina ceramic crucibles, alumina ceramic rods, alumina ceramic boats, alumina ceramic plates, alumina ceramic parts, etc.
There ars 3pcs 1800 ° C high-temperature kilns ,2pcs 1400 ° C low-temperature kilns produced by our company independently. There are slip casting(main),and extrusion molding,injection molding etc other molding technologies,which can satisfy the produvtion requirements of various specific ceramics products.
The company has 105 employees, including one senior ceramic engineer, three engineers, six overseas sales staff, and four professional after-sales staff.
FAQ
A1. Ceramics are non-metallic, inorganic materials that are typically composed of a combination of metallic and non-metallic elements. Alumina is a type of ceramic oxide, specifically an oxide of aluminum. It is widely used in various applications due to its excellent mechanical, thermal, and electrical properties.
A2. Because of their excellent chemical stability, Alumina ceramic fasteners are used widely in acid-resistant pump impellers, pump bodies, acid-carrying pipe linings and valves. Aluminum oxide ceramics are used in the manufacture of textile wear parts and knives. This is due to their extreme hardness and wear resistance.
A3. Alumina ceramic fasteners is a very hard ceramic that is excellent at resisting abrasion and is ideal for wear-resistant inserts or products.
Certificates
Feedback
1. If you have any questions or questions, please contact us and we will communicate with you as soon as possible.
2. For any other satisfaction, please also feedback to us to make our service better and better.